HOPERF - RF Receivers > HopeRF

HopeRF

(주)피코아이앤시는 항상 최고를 추구합니다.

HOPERF는 RF IC 전문 기업입니다. Sub 1G 및 2.4GHz IC 솔루션을 제공하고 있습니다.1998년에 설립된 Shenzhen Hope Microelectronics Co.,Ltd (이하 HOPERF)는 반도체 제품, RF IC와 센서 Module 및 솔루션을 공급하는 선도적 기업입니다.HOPERF사는 자사 제품을 33개국으로 수출하여 1,000여개 이상의 브랜드 고객에게 서비스를 제공했으며 그 범위를 넓혀가고 있습니다. 

(주)피코아이앤시는 HOPERF 대리점입니다.​​​​ ​

HOPERF - RF Receivers

페이지 정보

profile_image
작성자 관리자
댓글 0건 조회 263회 작성일 23-08-09 16:10

본문

*Sub-GHz receiver IC


CMT2210AW ultra low power, high performance, low-cost OOK stand-alone RF receiver

CMT2210LW ultra low power, high performance, low-cost OOK stand-alone RF receiver

CMT2217AW OOK stand -alone RF receiver

CMT2219AW ultra low power, high performance, OOK and (G)FSK RF receiver



CMT2210AW


ultra low power, high performance, low-cost OOK stand-alone RF receiver 

The CMT2210AW is an ultra low power, high performance, low-cost OOK stand-alone RF receiver for various 300 to 480 MHz wireless applications.


Descriptions


The CMT2210AW is an ultra low power, high performance, low-cost OOK stand-alone RF receiver for various 300 to 480 MHz wireless applications. It is part of the CMOSTEK NextGenRFTM family, which includes a complete line of transmitters, receivers and transceivers. An embedded EEPROM allows the frequency, symbol rate and other features to be programmed into the device using the CMOSTEK USB Programmer and RFPDK. Alternatively, in stock products of 315/433.92 MHz are available for immediate demands with no need of EEPROM programming. When the CMT2210AW is always on, it consumes only 3.8 mA current while achieving -114 dBm receiving sensitivity. It consumes even less power when working in duty-cycle operation mode via the built-in sleep timer. The CMT2210AW receiver together with the CMT211xW transmitter enables an ultra low cost RF link.


Features


    Embedded EEPROM

        -Very Easy Development with RFPDK

        -All Features Programmable

    Frequency Range: 300 to 480 MHz

    Sensitivity: -114 dBm at 1 kbps, 0.1% BER

    3-wire SPI Interface for EEPROM Programming

    Stand-Alone, No External MCU Control Required

    Configurable Duty-Cycle Operation Mode

    Supply Voltage: 1.8 to 3.6 V

    Low Power Consumption: 3.8 mA

    Sleep Current < 20 nA

    Low Sleep Current

        -60 nA when Sleep Timer Off

        -440 nA when Sleep Timer On

    RoHS Compliant

    16-pin QFN 3x3 Package


Applications


    Low-Cost Consumer Electronics Applications

    Home and Building Automation

    Infrared Receiver Replacements

    Industrial Monitoring and Controls

    Remote Automated Meter Reading

    Remote Lighting Control

    Wireless Alarm and Security Systems

    Remote Keyless Entry (RKE)

CMT2210LW


ultra low power, high performance, low-cost OOK stand-alone RF receiver 

The CMT2210LW is an ultra low power, high performance, low-cost OOK stand-alone RF receiver for various 300 to 480 MHz wireless applications.


Descriptions


The CMT2210LW is an ultra low-cost, low power, high performance OOK stand-alone RF receiver for 315/433.92MHz wireless applications. It is part of the CMOSTEK NextGenRFTM family, which includes a complete line of transmitters, receivers and transceivers. The CMT2210LW is a true plug-and-run device, no register configuration and manually-tune is required. The device operates at either 315 MHz or 433.92 MHz through selecting an 18.8744 MHz or 26 MHz crystal, the data rate is optimized to around 2.4 ksps which fits well with the low-end data encoder or MCU based transmitter. The CMT2210L operates from 1.8 V to 3.6 V, finely work till the end of most batteries’ power. It consumes 3.3 mA current while achieving -109 dBm receiving sensitivity at 315 MHz and consumes 3.8 mA current while achieving -108 dBm receiving sensitivity at 433.92 MHz. The SOP8 package is available for easier and lower-cost manufacturing. The CMT2210LW receiver together with the CMT211xW transmitter enables an ultra low cost RF link. For NextGenRFTM receivers with more flexibility, the user can use the CMT2210LW


Features


    Operation Frequency: 315/433.92 MHz

        OOK Demodulation

        Symbol Rate: 0.1 to 3.4 ksps

    Sensitivity: -108 dBm at 2.4 ksps, 0.1% BER

    Receiver Bandwidth: 200 kHz

    Image Rejection Ratio: 25 dB

    Large Signal Handling: 10 dBm

    Stand-Alone, No External MCU Control Required

    No Register Configuration Required

    Supply Voltage: 1.8 to 3.6 V

    Low Power Consumption

        3.3 mA @ 315 MHz

        3.8 mA @ 433.92 MHz

    RoHS Compliant

    SOP8 Package


Applications


    Low-Cost Consumer Electronics Applications

    Home and Building Automation

    Infrared Receiver Replacements

    Industrial Monitoring and Controls

    Remote Automated Meter Reading

    Remote Lighting Control

    Wireless Alarm and Security Systems

    Remote Keyless Entry (RKE)

*문의

TEL. 031-479-1828~9

E-Mail: alex_sung@picoinc.co.kr